Home > POS Management > Tills > How Do I...? > Configure IP Printing?

How Do I Configure IP Printing?

When configuring an IP Printer for use with the POS System, you need to ensure the following configuration settings are correct. The following example shows the configuration screens when using an Epson Receipt Printer. Other printer types will offer similar configuration.

1

Once the printer is configured and the device is listed in the Windows Printers and Faxes screen, go to Start >Printers and Faxes, then right-click the printer and select Properties from the pop-up menu.

2

Click the General tab. Click the Printing Preferences button. On the next screen, select the Layout tab.

3

From the Paper Size drop-down, select User Defined Paper Size.

a. Give the paper size a name. Press Save Paper Size.

b. Set Paper Width : 80mm

c. Set Paper Length : 3276mm (this is the max setting)

d. Press OK.

 

4

In Document Settings, click the Paper Source Option. It will display the options available. From the list select the Page [Feed, Cut] option.

Click Apply, then OK.

6

Set these settings as default. From the Properties screen click Advanced’, and then click Printing Defaults.

 

Click the Layout tab, and change the paper size to the new one created, then click Apply. Now click the Document Settings tab, and change the Paper Source to make sure the settings are Page [Feed, Cut}, then again click Apply.

Click Apply, and then OK.

 

This completes the printer configuration.

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)